Top Quality Three Chuck Laser Tube Cutting Machine-9028C

Advantages and Characteristics

• High speed:The chuck has a high speed of 110RPM, acceleration of 1.1G, high cutting efficiency, standard configuration, and competitive advantages in overall price.
• Material saving:Chuck avoidance, 0-50mm ultra short tail material, breaking industry records and increasing material utilization.
• High range compatibility:With a diameter of Ф15~275mm, it is compatible with circular pipes, square pipes, elliptical pipes, special-shaped pipes, etc., and has obvious advantages over thin-walled pipes.
• High precision chuck:Real time stable control of clamping force, making machining accuracy more stable, automatic lubrication inside the chuck, reducing maintenance, and ensuring more stable operation of the structure.
• Automatic feeding: Side suspended machine tool structure, standard semi-automatic feeding machine, high feeding cycle time of 20-3
• Stability: Combined with pneumatic support to prevent pipe swinging and achieve high stability in cutting.
• Low cost: There are no high cost consumables, and the main losses are electricity bills, protective lenses, and copper nozzles.

Video

Technical parameters of the whole machine

Key components and motion control

Machine bed

Made of welded plates and pipes, annealed at high temperature of 600 degrees Celsius for 4.5 hours, slowly cooled to 200-300 degrees Celsius in the furnace, and then air-cooled to eliminate internal bed stress. After rough machining, precision machining is carried out, greatly improving the rigidity and stability of the machine tool and ensuring its long-term stability and accuracy. The side mounted machine tool structure, paired with an automatic feeding machine, can effectively improve feeding efficiency and ease of unloading.

Rigidity: Welding of plates and pipes, the bed structure is connected horizontally and vertically by multiple reinforced rib tube plates to ensure rigidity.

Welding: The welds on both sides are evenly distributed, symmetrically and staggered, reducing welding deformation.

Annealing report: Each bed frame number has an annealing report

Fully automatic feeding machine, semi-automatic unloading machine

It can achieve automatic feeding of a bundle of raw materials, matching the feeding and positioning of the clamping jaws for feeding, and accurately clamping the profiles with the rear card to insert them forward.

The standard machine can store a maximum of one bundle of materials

Pneumatic flap lifting for pipe processing, reducing pipe swinging and avoiding accuracy deviation caused by pipe swinging.

Beam and X-axis/Z-axis devices

1. The crossbeam undergoes annealing to eliminate internal stress, ensuring the rigidity and stability of the moving components of the laser head. During the movement, the limit switch controls the stroke to limit, and there are also elastic buffer pads at both ends for mechanical limit, ensuring the safety of the system operation.

2. The Z-axis device is mainly used to achieve the up and down movement of the laser head. The up and down movement of the laser head is controlled by a CNC system servo motor, which drives the linear module and drives the Z-axis slider to reciprocate up and down. Both ends are controlled by proximity switches to ensure safe and reliable movement.